[hackspacebristol] Contact: Laser Cutter

adam armfield adamairmailed at yahoo.com
Sun Apr 14 09:42:35 UTC 2013


is the acrylic matte on one side? - as i recall reflective stuff can't be used - though remember someone else leaving backing paper on.

 
All the best


Adam


________________________________
 From: matthew venn <matt at mattvenn.net>
To: contact at mintonfilm.co.uk1 
Cc: "hackspacebristol at lists.aktivix.org" <hackspacebristol at lists.aktivix.org> 
Sent: Sunday, 14 April 2013, 10:37
Subject: Re: [hackspacebristol] Contact: Laser Cutter
 


John,


if it's a small, non-repeating job then I'm sure I can help you out. Otherwise, you should join the hackspace and get inducted to the laser cutter so you can use it when you want.

Matt



On 12 April 2013 14:30, John Minton <contact-form at bristol.hackspace.org> wrote:

Name: John Minton
>
>Email: contact at mintonfilm.co.uk1
>
>Subject: Laser Cutter
>
>Message: Hi,
>I'm based in BV Studios (M1) in Penny's space.
>I've got a project which will require laser cutting A4 3mm Mirrored
>Acrylic into various segments. Will it be possible to pop down during
>the day next week sometime. Tues/Weds probably best. Best Regards John
>
>IP: 195.10.248.18
>HOST: bmex-gw.bristolwireless.net
>
>
>


-- 
Matthew Venn
mattvenn.net 
_______________________________________________
Hackspacebristol mailing list
Hackspacebristol at lists.aktivix.org
https://lists.aktivix.org/mailman/listinfo/hackspacebristol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.aktivix.org/pipermail/hackspacebristol/attachments/20130414/91e3f4ef/attachment.html>


More information about the Hackspacebristol mailing list